| BAND
SAW TROUBLESHOOTING GUIDE |
|
|
|
|
INITIAL
MACHINE SET UP AND INSTALLATION
SELECT THE SHARPENERS(s) THAT BEST
MATCH THE SIZE, TYPE AND QUANTITY OF SAWS
Product
Selection Chart |
| |
Single Cut Saws |
Shake Saws |
Single Cut Saws |
Double Cut Saws |
Single Cut Saws |
Double Cut Saws |
| Model Number |
2 |
2-S |
4 |
4-D |
6 |
6-D |
| Saw Width |
2" to 8" |
1" to 2" |
6" to 14.5"
*** |
6" to 14.5" |
8.5" to 16"
** |
8.5" to 16" |
| Tooth Space (Max.) |
2" |
2" |
2.5" |
2.5" |
3.5" |
3.5" |
| Tooth Depth |
1/4"-7/8" |
1/4"-7/8" |
3/8"-1-1/4" |
3/8"-1-1/4 |
1/2"-1-1/2" |
1/2"-1-1/2" |
| Grinding Wheel Size |
10" OD x 1"
hole |
10" OD x 1"
hole |
12" OD x
1.25"hole |
12" OD x
1.25"hole |
12" OD x
1.25"hole |
12" OD x
1.25"hole |
| Dust Pipe Size |
3" |
3" |
4" |
4" |
4" |
4" |
| Hand Post Brackets |
4 No. 13** |
None |
2 No. 16 |
4 No. 16 w/belt |
3 No. 16 |
5 No. 16 w/belt |
| Auto. Post Brackets |
1 No. 14 |
None |
1 No. 17 |
1 No. 17 w/belt |
1 No. 17 |
1 No. 17 w/belt |
| Back Feed Guides |
None |
None |
1 No. 18 * |
2 No. 18 * |
1 No. 18 |
2 No. 18 * |
|
- * Not supplied when optional 75
Air Back Feed Unit is ordered.
- ** Two No. 13 Post Brackets supplied when optional 75 Back
Feed Unit is ordered.
- *** With saw liner, a No. 4 can
handle saw widths of 4" to 14.5", a No. 6 can handle saws 6-1/2" to
16" wide.
- NOTE: The No. 6 Sharpener has been discontinued. All
spare parts, including cams, SideWinder, StrongArm and Post Brackets are available.
|
-
|
|
|
|