StrongArm II Power Clamp

The StrongArm II Air Clamp features two clamping pressures for increased grinding accuracy and extra sharp saws.  The saw is clamped firmly to the carbide faceplate during face grinding while reduced pressure keeps the saw in line against the faceplate as the saw is advanced.

No. 75 Air Back Feed Unit

Use of an air back feed unit delivers better capacity and a smoother, more uniform feed of the saw into the sharpener.  The air back feed works independently, so there is less wear and strain on the sharpener itself.

Narrow Saw Liner

For extremely narrow saw applications, Armstrong provides saw liners that act as a spacer in the saw carriage.  This allows the operator to accurately grind single cut saws as narrow as 4" wide on a No. 4 model sharpener, or 6 1/2" wide on a No. 6 model sharpener.

SideWinder Feed Finger

The SideWinder Feed Finger is designed for increased accuracy in profile grinding both Cobalt Chromium Alloy tipped and swaged tooth saws.  The SideWinder pivots around the side of the tooth just below the Cobalt Chromium Alloy tip or swaged point, instead of over the top.

To ensure accurate grinding, the SideWinder is easily adjusted to position the feed finger square on the tooth.  The swaged tooth version of the SideWinder also independently adjusts the carbide point to feed in the center of the swage pocket.

ShapeUp grinding wheel dressing/ shaping/ truing system for sharper saws, and lower grinding costs.

Safety Hoods for safer, cleaner and quieter filing rooms.