| Part No. | Name |
| 10 | Ribbed Washers for 55 (2 req.) |
| 55 | Front Guide Arm |
| 57 | Holder for Die with Nut 57A |
| 57A | Nut for 57 |
| 62 | Stud for Stop Bracket (2 req.) |
| 66A | Lever for Clamp Screw, complete |
| 66C | Split Clamping Head for Clamp Screw Lever |
| 67 | Lever for Die , complete |
| 67C | Clamping Socket only for Die Lever |
| 79 | Eccentric die (Long Bite) |
| 79-G | Anvil setting gauge for 79 |
| 85B | Clamp Screw (Moveable) |
| 85C | Carbide Tipped Clamp Screw (Moveable) |
| 91 | Anvil |
| 91C | Carbide Tipped Anvil |
| 115 | Top Screw for Anvil |
| 142C | Fiber Washer (2 req.) |
| 164 | Eccentric die (Extra-Short Bite) |
| 250 | Eccentric die (Short Bite) |
| 250-G | Anvil setting gauge for 250 and 164 |
| 251 | Clamp Screw (Stationary) |
| 251C | Carbide Tipped Clamp Screw (Sta.) |
| 302 | Nut for 251 with Washer 4071 |
| 2939 | Head |
| 4071 | Washer for 25 |
| 4701 | Stop Bracket |
| 9255-C100 | 5/16" NF Socket Head Side Anvil Screw |
| 5713 | Plastic handle (2 req.) |
| 9506-C25 | Jam Nut (2 req.) |
| 6238 | Steel Shank only for Levers (2 req.) |
| 6250 | Socket Head Wrench Set |
| 6951 | Spring for Front Guide Shoe |
| 6952 | Front Guide Shoe |